Rule LoPro 900S Bilge Pump
This pump is just 5.6cm high and feature a fully rotatable discharge body so it can be swivelled to either side in the bilges.
- Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose.
- Dimensions: 237mm long, 59mm diameter.
- Current Draw: 4(amps)
- Fuse Size: 7.5(amp)
- Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m
- Brings Rule pumping power to tight spaces.
- Fully rotating discharge body for installation flexibility.
- Choice of discharge ports supplied with each pump.
- Ignition protected.
- Horizontal or Vertical Mounting
- 3 Operation Modes:
- High water mode; The pump starts when the water level reaches 50mm (2")
- Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
- Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.
.png)
.png)
