Rule Submersible 360 GPH Bilge Pump and Float Switch
Bilge pump
- Connections: For 19mm (3/4") bore hose.
- Dimensions: 99mm high, 64mm x 74mm.
- Current Draw: 2.1(amps)
- Fuse Size: 2.5 amp
- Output: Up to 23 litres/minute (5 gallons/minute) without check valve. Max. recommended discharge head 2m.
- Light, compact pump for ski-boats and small vessels.
- Tough plastic body with integral strainer.
- Quick release inlet strainer allows rapid cleaning.
- Low amp draw conserves batteries.
- Built-in Thermal Cut-Off.
- Check Valve included for Back Flow Prevention.
- Vented body to prevent air locking.
- Threaded port for easier installation and maintenance.
- For automatic operation use Rule Float Switches.
- Base not interchangeable with old range but can be fitted to existing screw holes.
Float Switch.
- Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift)
- Maximum Current: 14 amp
- Suitable for 12 / 24 / 36vdc
- For automatic on/off bilge pump control.
- Switch design prevents rapid on/off cycling.
- Also available with fuse holder - see below
- Optional cover available.
- Mercury Free
