Rule Submersible Bilge Pump 12 volt DC with 750mm cable.
Submersible pump 12 volt DC.
- Non-Automatic (uses a panel and/or float switch)
- Submersible
- Ignition protected
- High efficiency, low amp motor
- Non burn-out when dry
- Stainless steel shaft
- Includes: back-flow preventer / 1" (25mm) straight hose barb / 1'1/8" (29mm) straight hose barb
Technical Info:
- Connections: For 25mm (1") and 28mm (1 1/8") bore hose.
- Dimensions: 111mm high, 64mm x 74mm.
- Current Draw: 3.7(amps)
- Fuse Size: 6(amp)
- Output: Up to 69 litres/minute (15 gallons/minute). Max recommended discharge head 2m.
- Compact pump for smaller vessels.
- Tough plastic body.
- Quick release inlet strainer allows rapid cleaning.
- Low amp draw conserves batteries.
- Built-in Thermal Cut-Off. Motor rated for 1500-hour life.
- Check Valve included for Back Flow Prevention.
- Vented body to prevent air locking.
- Threaded port for easier installation and maintenance.
- For automatic operation use Rule Float Switches.
- Base not interchangeable with old range but can be fitted to existing screw holes.
- Packaged Dimensions: L:18.00 x H:9.00 x W:17.00cm
- Actual Weight: 0.41 Kg (Approx. 0.61 Kg packed)
.png)
.png)
