International Primocon Underwater Antifoul Primer From £24.00


Part CodeStockOptionPriceBasketWishList
YPA984/750In Stock750ml Primocon Grey
£24.00
Buy Now
Add to WishList
YPA984/2.5Not In Stock
Request Stock Alert
2.5ltr Primocon Grey
£64.50
RRP £67.82
Save 5%
Add to WishList
Postage to United Kingdom on this item is £6.15
FREE SHIPPING to UK on orders over £100
  • Description
  • Reviews
  • Price Match Request
  • Q&A
International  Logo

International Primocon Conventional Underwater Primer

PRODUCT DESCRIPTION

Tar-free, quick drying conventional primer for all substrates underwater. Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings.
* Primocon prevents leaching of TBT from an underlying antifouling coating provided it is applied at a minimum dry film thickness of 80 microns (minimum 2 coats by roller) & that the film remains intact.

PRODUCT INFORMATION
Colour YPA984-Grey
Finish Matt
Specific Gravity 1.1
Volume Solids 33%
Typical Shelf Life 2 yrs
VOC (As Supplied) 584 g/lt
Unit Size 750 ml 2.5 Lt 5 Lt

DRYING/OVERCOATING INFORMATION
Drying time:From 1.5 to 1 hrs
Overcaoting:From 6hrs to 24hrs depending on Antifoul

APPLICATION AND USE
Preparation Wash all surfaces except STEEL with Super Cleaner.
BARE GRP Sand using 180-220 grade (grit) paper.
BARE WOOD/PLYWOOD Sand smooth with 80-180 and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct to wood (see specific coating systems).
ALUMINIUM Degrease with solvent or Super Cleaner. Sand well using 24-120 grade (aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Pre-prime using an International primer as soon as possible (within 8 hours) as detailed for specific coating systems.
ZINC/GALVANISED STEEL Degrease with solvent or Super Cleaner. Sand well using 60-120 grade paper. Clean thoroughly and allow to dry completely. Pre-prime using an International primer as detailed for specific coating systems.
LEAD Degrease with solvent or Super Cleaner. Sand well using 120 grade paper or power wire brush. Clean thoroughly and allow to dry. Pre-prime using an International primer as detailed for specific coating systems.
STEEL Gritblast to Sa 2½ - near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface with a 50-75 microns anchor pattern. Use angle grinder onsmall areas. Pre-prime with Primocon thinned 10-15% with Thinners No.3.

PREVIOUSLY ANTIFOULED SURFACE
In Good Condition Remove loose material. Wash down with fresh water. Allow to dry.
In Poor Condition Remove using Interstrip. Primocon Primers Conventional Underwater Primer

PLEASE NOTE: DUE TO SHIPPING RESTRICTIONS, THIS PRODUCT IS ONLY AVAILABLE FOR DELIVERY WITHIN THE UK OR IRELAND!

Our Best Selling International Antifouling
Loading ...
Our Best Selling Antifouling
Loading ...
Also Bought
Toplac by International Marine Silicone Rubber Sealant by GeocelDyneema D Pro (D12) by Liros
Add to WishList
Add to WishList
Add to WishList
International Toplac
Now£26.95
RRP £30.00
Save 10%
Geocel Marine Silicone Rubber Sealant
Now£9.29
Liros Dyneema D Pro (D12)
Now£0.80
 
Danboline Bilge Paint by International Watertite by International Trilux Antifoul by International
Add to WishList
Add to WishList
Add to WishList
International Danboline Bilge Paint
Now£22.50
RRP £23.24
Save 3%
International Watertite
Now£24.00
International Trilux Antifoul
Now£25.50
RRP £28.25
Save 10%
 
Brass Butt Hinges by HoltPolyester Fibreglass Repair Kit by TalamexHigh Performance Gear Lube by Quicksilver
Add to WishList
Add to WishList
Add to WishList
Holt Brass Butt Hinges
Now£3.60
Talamex Polyester Fibreglass Repair Kit
Now£16.85
Quicksilver High Performance Gear Lube
Now£11.02
 
Our Best Selling International Products
Loading ...