Barton Marine Ball Bearing 2:1 Mainsheet System - Size 2  £425.00

Barton Ball Bearing Mainsheet System

Size 2 Re-circulating Traveller Kit 2:1 For Yachts up to 11m

24900

Pre-packaged mainsheet systems with all components required in one complete kit – sliding bolt track, traveller, end fittings, plastic end caps, pilot track and full fitting instructions.

Travellers, end fittings and track are all extruded from top quality marine grade aluminium and finished in our unique 'Spectro' grey anodised finish.

Sliding bolt track allows for a smooth, clean profile and also makes retro-fitting easier as bolts can be slid along the extrusion to match existing fastening holes.

Two sizes – for yachts up to 11m LOA 36ft
2 to 1 Recirculating precision ground delrin ball system.

Specifications: Size 2
Max Boat Size: 11.0m 36ft
Track Width: 26mm
Track Length: 1.6m
Max control line dia: 8mm
SWL: 700Kg
Fastenings: 6mm

Guide to choice of size:
Size 2 for yachts up to 11.0m - 36ft

Important note: boat sizes
Suggested boat sizes are given as guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller.
Mid-boom sheeting and severely angled take offs can impose greater loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advice.
If you are close to the maximum boat size suggested, we would advise upgrading to the next size up.
Complete pack kits are not suitable for open span applications as they require beam section track

2 to1 Purchase Kit  Size 2 24900
with cleats at 70 degrees on end fittings
1.4m size 1 - 1.6m size 2 sliding bolt track
Traveller car with single shackle take off
End fittings - pair
Plastic end caps - pair
Pilot track & fitting instructions.

COLLECTION ONLY OR SPECIAL CARRIAGE QUOTE